What Spoofing is?
The term “spoofing” is generally regarded as slang, but refers to the act of fooling — that is, presenting a false truth in a credible way. There are several different types of spoofing that occur, but most relevant to networking is the IP spoof. Most types of spoofing have a common theme: a nefarious user transmits packets with an IP address, indicating that the packets are originating from another trusted machine.
The first step in spoofing is determining the IP address of a host the intended target trusts. After that, the attacker can change the headers of packets to make it seem like the transmissions are originating from the trusted machine.
Kinds of Spoofing: –
1) Blind spoofing:
In this type of attack, a cracker outside the perimeter of the local network transmits multiple packets to his intended target to receive a series of sequence numbers, which are generally used to assemble packets in the order in which they were intended — Packet 1 is to be read first, then Packet 2, 3 and so on.
The cracker is blind to how transmissions take place on this network, so he needs to coax the machine into responding to his own requests so he can analyze the sequence numbers.
By taking advantage of knowing the sequence number, the cracker can falsify his identity by injecting data into the stream of packets without having to have authenticated himself when the connection was first established. (Generally, current operating systems employ random sequence number generation, so it’s more difficult for crackers to predict the correct sequence number
2) Non-blind spoofing:
In this type of attack, the cracker resides on the same subnet as his intended target, so by sniffing the wire for existing transmissions, he can understand an entire sequence/acknowledge cycle between his target and other hosts (hence the cracker isn’t “blind” to the sequence numbers). Once the sequence is known, the attacker can hijack sessions that have already been built by disguising himself as another machine, bypassing any sort of authentication that was previously conducted on that connection.
3) Denial-of-service attack (DoS):
To keep a large-scale attack on a machine or group of machines from being detected, spoofing is often used by the malefactors responsible for the event to disguise the source of the attacks and make it difficult to shut it off. Spoofing takes on a whole new level of severity when multiple hosts are sending constant streams of packet to the DoS target. In that case, all the transmissions are generally spoofed, making it very difficult to track down the sources of the storm.
4) Man-in-the-middle attack:
Imagine two hosts participating in normal transmissions between each other. In a man-in-the-middle attack, a malicious machine intercepts the packets sent between these machines, alters the packets and then sends them on to the intended destination, with the originating and receiving machines unaware their communications have been tampered with; this is where the spoofing element enters the equation.
Typically, this type of attack is used to get targets to reveal secure information and continue such transmissions for a period of time, all the while unaware that the machine in the middle of the transmission is eavesdropping the whole time.
Spoofing, while mostly negative, has some more or less legitimate applications. Satellite Internet access is one. Packets going to orbit and coming back have a relatively long latency, and there are a lot of protocols in common use that don’t take well to this delay.
Satellite providers may spoof these protocols, including IP, so that each end of a packet flow receives acknowledgment packets without much delay.
Also, since VPN applications are particularly prone to problems with latency, special software from these providers generally performs more “accepted” spoofing
How can one prevent from such attacks?
Spoofing can be controlled.
Following are five things which can help one in preventing such types of attacks to affect ones NETWORK.
- Use authentication based on key exchange between the machines on your network; something like IPsec will significantly cut down on the risk of spoofing.
- Use an access control list to deny private IP addresses on your downstream interface.
- Implement filtering of both inbound and outbound traffic.
- Configure your routers and switches if they support such configuration, to reject packets originating from outside your local network that claim to originate from within.
- Enable encryption sessions on your router so that trusted hosts that are outside your network can securely communicate with your local hosts.
Taksa, is a firm involved in IT Outsourcing, Offshore staffing which feels like next door – in various fields like System Administration, Cloud computing with Microsoft Azure and Amazon Web services (AWS), IT security, Application Developments to name a few and many more. It has high skilled and talented team of professionals on various departments and fields. The working environment is very friendly and supportive. The co-workers are too very supportive.
I have recently joined Taksa as System Administrator. When I joined here I was unaware of cloud computing like AWS and Microsoft Azure. But got through it with training provided by the team. So far it has been so good for me to be a part of Taksa. Have learnt many things here and hope to keep the same ahead. As with time technologies keep on changing, and we have to keep up with it!